1. Prepare the Bottle Caps:
Use a hot punch or hole puncher to create a small hole in the center of each cap. These will serve as wire connectors.
2. Assemble the Signal Receiver:
Pair the caps — connect two together with a wire, and do the same with the remaining two. Attach the coaxial cable: connect the center wire to one pair, and the braided shield to the other.
3. Attach to the Lamp Frame:
Use the metal structure of the lamp to support the cap pairs. Fix the caps to each end of the arm, spacing them slightly apart.
4. Insulate the Connections:
Ensure there’s no contact between the center conductor and the shield to avoid interference. Wrap with electrical tape for safety.
5. Connect to Your TV:
Plug the coaxial cable into your TV’s antenna port, scan for channels, and adjust the antenna’s angle for the best signal.
For complete cooking times, go to the next page or click the Open button (>), and don't forget to SHARE with your Facebook friends.
