Get your car looking like it just drove off the lot again!

Ouadie Rhabbouron

Opt for Microfiber Tools

Sponges capture and hold dirt and grit in their large pores. You can wring yours out, but the grit will stay put when car cleaning. Once grit is embedded, you may as well wash your car with sandpaper. Detailers use a microfiber car wash mitt because the grit falls out when you rinse, it’ll make a do it yourself car wash that much better.

Chamois soak up water, but they don’t pick up any grit that’s left after rinsing. Instead, they just grind those particles into your paint. A microfiber towel, on the other hand, collects the particles. Rinse the towel in clean water to remove the grit. Then wring and keep drying.

Wash With the Right Suds

Even though hand dish washing liquid is a great degreaser, it’s not the thing to use on your vehicle’s finish. Yes, it removes dirt, grease and old wax. But it also sucks important oils right out of the paint’s finish. Use it repeatedly and you shorten the life of your paint job. Car detailing professionals use a different soap, and you should to if this is on your DIY list.

Instead of dish soap for a do-it-yourself car wash, use a cleaner formulated for vehicles. Once you’ve mixed the suds, fill a second bucket with clean rinse water. Use it to rinse your wash mitt often. That’ll remove most of the road grit from the mitt to prevent scratches.

Rinse Before Washing

If you hit your dry paint with soapy water, you’ll just grind the surface dust and road grit into your paint finish. Professional detailers always start with a clear water rinse to remove as much dust and dirt as possible.

Slide Seats Forward and Clean Out the Junk

You’ll be surprised by what you find behind the seats. We found a lost cell phone, enough pens and pencils to equip a small office, and enough change for several vending machine lunches. Vacuum the seats, remove the mats and vacuum the carpet. Use a brush attachment for the dash and door panels. Don’t forget to clean out and vacuum those handy door pockets as well.

Vacuum As You Go

Most DIYers start cleaning the interior by shampooing the carpet. That’s a mistake—you’ll just get it dirty again as you clean the upper surfaces. Instead, start at the top and work your way down. Vacuum the headliner, dash, console and door panels. Then clean all the glass, and dust the nooks and crannies. Sweep the dust out of the cracks with a detailing brush.

Finish With the Glass

If you cleaned the inside of your windows before you cleaned the dash and applied vinyl protectant, you’ll just have to clean them again. That’s why detailers save glass cleaning until the very end. Cleaning the windows at this point removes all cleaning and vinyl treatment overspray and leaves you with sparkling clean windows.

2 / 13
13 Tips For Diy Car Detailing
FAMILY HANDYMAN

Take Care of Your Leather

Leather interiors need special attention; they are one of the more meticulous aspects of DIY car detailing. You’ll want to clean yours regularly and repair it as needed to elongate its life as much as possible.

Clean the Leather

This may sound extreme, but if you’ve got leather upholstery, buy a leather-cleaning kit and keep it in the vehicle. If you clean spills right away, you increase your chances of a complete cleanup. If you wait, lipstick, ink and dye transfers from clothing and plastic shopping bags can set permanently in as little as 24 hours.

Pretreat the leather with a conditioner before you start the stain removal process. Wipe the ink lifter directly on the pretreated leather and rub it in. Let it sit for 30 seconds, and wipe it with a clean cloth. Then apply leather cleaner and the leather protection cream.

Fix Tears in Leather Seats

Bad tears require the attention of a professional. But if your tears are small, and you want to save some money, you can repair them yourself. A leather/vinyl repair kit is inexpensive, and the repair takes only an hour. But don’t expect perfection. You’ll still see the tear, and you probably won’t get a perfect color match. However, this fix will contain the tear and look better than a gaping hole.

3 / 13
13 Tips For Diy Car Detailing
FAMILY HANDYMAN

Plastic and Vinyl

The plastic and vinyl in your car needs attention during your DIY car detailing process too. A little elbow grease goes a long way to keeping these materials looking fresh and clean.

Washing

Apply SEM Soap to vinyl and plastic surfaces and scrub with a scuff pad. Put extra effort into textured and recessed areas. Wipe the surface with a clean, damp, lint-free cloth and let dry.

Colorant

Spray on several light coats of colorant, allowing 5 to 10 minutes between coats. Let the colorant dry for 24 hours before using.

4 / 13
13 Tips For Diy Car Detailing
FAMILY HANDYMAN

Continued on next page

 

For complete cooking times, go to the next page or click the Open button (>), and don't forget to SHARE with your Facebook friends.

«« Previous Next »»

“I married a woman thirty years older than me—despite my family’s strong objections. But on our wedding night, I uncovered a secret that changed everything. My name is Arjun Mehra. I’m twenty years old, about 180 cm tall, and currently in my second year at one of New Delhi’s top universities. Until recently, my life was simple—classes, exams, and future plans. That all changed the day I met Kavita Rao. She was sixty—graceful, composed, and impossible to ignore. Once the owner of a successful chain of luxury restaurants in Mumbai, she had stepped away from business and lived a quiet, private life. We met at a charity event in Gurugram. While others tried to stand out with loud conversations and laughter, Kavita remained calm and reserved. Her silver hair reflected the light, and her presence alone drew attention without effort. A few days later, she invited me to her mansion in South Delhi for tea. What I expected to be a short, polite visit turned into hours of meaningful conversation. She spoke openly about her life—early success, a marriage that ended without conflict, and a loneliness that lingered despite her achievements. She had everything—wealth, status, respect—except someone to truly share it with. Somewhere in those conversations, I realized I cared deeply for her. Not because of what she owned, but because she understood life in a way most people my age didn’t. Three months later, during a rainy evening, I told her I wanted to spend my life with her—no matter the age difference. The backlash was immediate. My family accused me of being after her money. My father called it disgraceful. My mother cried for days. Friends whispered behind my back. Eventually, I chose to walk away from all of them. We got married at her villa, with only a few of her close business associates present. I was the youngest person in the room—and I could feel every judgmental glance. That night, alone together as husband and wife, the atmosphere felt heavy and quiet. Kavita sat beside me and handed me a thick folder. Inside were documents—properties in Mumbai, ownership papers, and keys to a luxury car. I was overwhelmed. “I don’t want any of this,” I told her. “That’s not why I married you.” She studied me carefully before speaking, her tone calm but firm. “Arjun, you need to understand something,” she said. “Loneliness isn’t the only reason I chose you. I need someone to carry on what I’ve built.” Her words unsettled me. She explained that she had no children, and her wealth—worth hundreds of crores—would otherwise fall into the hands of distant relatives waiting for their chance. “I want it to go to you,” she said quietly. “But there’s one condition.” The room suddenly felt smaller. My voice tightened as I asked, “What condition?” She held my gaze steadily… and began to explain.